Liquid Delivery Specifications _{For high accuracy liquid delivery, the MediCoat™ system for stent coating is used with Sono-Tek's AccuFluw™ precision pump. Controls: Fully Programmable through MediCoatII Input/Output Interfaces: Full PC control 16 inputs/16 outputs Capactiy: Unlimited continuous feed from reservoir Flow Rate Range: Less than ±1%}

Service Requirements _{Power: 100-240 VAC,50/60 Hz single phase, 2.5A Compressed Air: 15-150 psi/100-1000 kPa, clean, dry air or gas Exhaust: 3" port - 100 CFM with damper PC Controls: Windows 98 Operating System or higher*, Serial Port} * PC is available from Sono-Tek as a system option

Benchtop Specifications _{Construction: 316 stainless steel, Teflon®, Delrin®, tempered glass, anodized aluminum}

Ultrasonic Nozzle Specifications _{Materials: Nozzle Body:* Titanium alloy 6AI-4V Nozzle Housing: 316 stainless steel O-rings: Kalrez® Air Shroud: Delrin®/316 stainless steel Liquid Inlet:* 316 stainless steel (1/8" or 1/16" tubing) Air Inlet(1/4" tubing): 316 stainless steel Ultrasonic nozzles are available in three(3) operating frequencies, each of which produces drops of a different size range. Median drop diameter (based on water): 120 kHz (18 microns), 60 Hz (31 microns), 48 kHz (38 microns) Operating Temperature: 20 - 150°C Air Pressure: 0 - 2 psi Flow Rate: AccuMist™ Nozzle: 1 - 100 ml/hr MicroMist™ Nozzle: 0.3 - 9 ml/hr Spray Pattern Diameter: 0.010 - 0.030 inches (0.26 - 0.77 mm)} * Wetted materials :: Teflon®, Kalrez® and Delrin® are registered trademarks of E.I. DuPont de Nemours and Company :: Specifications may change without notice