Reservoir Construction _{1 and 3 Gallon: 316 stainless steel 1 Liter: Cast aluminum with high-density polyethylene}

Wetted Materials _{Reservoir: 316 stainless steel (1 and 3 gallon) High-density polyethylene (1 liter) Flow Meter/Metering Valve(1): Viton® O-ring Shutoff Valve: 316 Stainless steel, Viton®}

Standard Features _{Integrated Gas Regulator/Filter/Moisture Trap: 0-100 psi (0-700 kPa), adjustable regulator/5 micron particle filter and moisture trap Low-pressure Regulator: 0-10 psi (0-70 kPa) Low-pressure Gauge: 0-5 psi (0-35 kPa) Liquid Flow Meter (1): Variable-area type, 65 mm tube, milimeter scale Liquid Metering Valve (2): Precision needle type Liquid Shutoff Valve (3): Manual, half-turn, handle type Gas Pressure Relief Valve: 30 pso (210 kPa), with manual override (4) Liquid Tubing: Teflon® FEP, 1/4 inch OD x 10 ft.} (1) Relief valve rated at 25 psi (175 kPa) for the 1-liter system. Metering valve only is supplied with the 1-liter reservoir. Meter flow capacity must be specified at time of order. Other O-ring materials are available. (2) Valve is incorporated into flow meter housing on 1 and 3 gallon reservoirs. (3) Single-shot and automatically triggered applications require the optional electrically operated solenoid valve. (4) Relief valve rated at 25 psi (175 kPa) for the 1-liter system

Performance (5) _{Flow Rate Range: 0-3 gph (0-190 ml/min) Flow Stability: ± 10% Single-shot Accuracy: ± 10%} (5) Flow rates and stability depend on viscosity and density of the liquid, and the diameter of the liquid line to the nozzle

Options _{Solenoid Valve: 316 stainless steel, 24 VDC input, normally-closed Reducing Adapters: 1/4 in. to 1/8 in. (polypropylene) and 1/4 in. to 1/16 in. (stainless steel), for smaller size liquid lines Additional Low-pressure Regulator and Gauge: For nozzle systems containing auxiliary air handling devices for spray-shaping}

Ordering Information _{1-liter, 1-gallon, 3-gallon Systems Options: Solenoid Valve Reducing Adapters Low-pressure Regulator and Gauge Disposable Parts: Teflon® FEP tubing, 1/4 in. OD x 10 ft. Ferrules (set of 10): 1/8 in. or 1/16 in. adapters, 1/4 in. adapter end.} Teflon® and Viton® are registered trademarks of E.I. Dupont de Nemours and Company. Sono-Tek reserves the right to make changes to the product(s) described herein without notice.