Reservoir Construction _{1-gallon high-density polyethylene, 11 in. L x 6.5 in. W x 4.5 in. H}

Wetted Materials _{Reservoir and Vent Cap(1): High density polyethylene Basic Tubing: Tygon® Tubing Adapter Fittings(2): Polypropylene or 316 stainless steel Adapter Tubing(2): Teflon FEP® (1) The vent cap contains a cork gasket that can be removed in cases of liquid incompatibility (2) Tubing adapter fittings and lengths of tubing of both 1/8 inch and 1/16 inch diameter are included for installations where the inlet fittings on Sono-Tek ultrasonic nozzles require these sizes}

Performance: _{Flow Rate Range: 0 - 360 ml/min Flow Rate Stability: ± 10% (1) Actual flow rates and flow stability depend on the height differential between the nozzle and reservoir, tubing diameter and length, nozzle orifice diameter, and liquid properties such as viscosity}

Standard Features _{Mounting Stand: Anodized aluminum, consisting of a base assembly, vertical upright, and reservoir holding tray Nozzle Mounting Assembly: Consists of high-strength plastic, vertically adjustable slide arm, 360° rotatable nozzle holding clamp (for orienting spray direction), and a clamp mounting post Metering Type Pinch Valve: In-Line, micrometer-adjustable valve to fit over flexible 1/4 in. OD tubing Basic Tubing: Tygon®, 1/4 in. 01, 16 in. Tubing Adapter Fittings: Polyethylene compression type (transitions from 1/4 in. to 1/6 in.) 316 stainless steel compression type (transitions from 1/4 in. to 1/8 in.) Adapter Tubing: Teflon FEP®, 1/8 in. and 1/16 in. OD, 6 in. lengths}

Ordering Information _{1-gallon System Reducing Adapters: 1/8 in. tubing or 1/16 in. tubing Ferrules for adapter (set of 10 each): 1/4 in. or 1/16 in. Teflon® FEP tubing: 1/16 in. OD, 12 in. OR 1/8 in. OD, 12 in. Tygon® tubing: 1/4 in. OD, 16 in.} Teflon® is a registered trademark of E.I. DuPont de Nemours and Company. Tygon® is a registered trademark of Norton Company. Sono-Tek reserves the right to make changes to the product(s) described herein without notice